Chapter 4: Using the Chart 91
are displayed in the chart window and associated MARPA functions can be accessed
via the chart. For detailed information on MARPA see
page 174
.
To access the MARPA controls when you are in a chart application:
Note:
MARPA targets can not be acquired if you have a Digital Scanner, which is set to
Dual Range.
D6609-3
TARGET
TRACKING...
RADAR
OPTIONS...
Select the target
with cursor
On screen:
With radar overlay on:
ACQUIRE TARGET MARPA LIST...
MARPA
OPTIONS...
Or:
Marpa controls displayed
81244_4.book Page 91 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
