144 E-Series Networked Display Reference Manual
•Power setting.
Note:
The setup options available depend upon the DSM fitted to your vessel. Fish-
finder settings should not ordinarily require adjustment.
Configure preset frequencies
Change the settings for one or more of the fishfinder presets. The settings available
depend upon the transducer fitted.
Target depth ID
Depth readings for identified targets.
Depth lines
Horizontal lines indicating depth.
White line and bottom fill
Distinguish between echoes from fish near the bottom and from the bottom itself.
(See illustration.)
81244_4.book Page 144 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
