314 E-Series Networked Display Reference Manual
AIS features
Interfacing
Target symbols Sleeping, activated, selected, dangerous and lost.
Target information AIS vectors, safety critical data and full AIS data.
Collision avoidance Safe zones and safety messages.
Alarms Local alarm messages, lost targets
DSM connection for communication with DSM High Definition Fish Imaging
(HDFI)
NMEA 0183 Input GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA, RMB, RMC,
XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB, VLW, MWV,
WPL, RTE, DSC and ZDA.
Selectable to 4800, 4800 Navtex, 9600 Navtex or 38,400
AIS
NMEA Output - User
selectable
APB, BWC, BWR, DBT, DPT, GGA, GLL, MTW, RMA, RMB,
RMC, RSD, TTM, VLW, VHW, VTG, WPL, VHF/DSC and ZDA
SeaTalk Input
Depth,SOG,COG, Position, Waypoint number, range/ bearing, TTG,
Boat speed, Time, XTE, Heading, Wind, data, Log/Trip, Pilot status,
Temperature, MOB and cursor position
SeaTalk Output
Cursor data, guard zone and navigational data bridged from
NMEA
SeaTalk
2
Input
SeaTalk
2
Output
Scanners
Two digital radar’s can be connected but only a single analogue
radar should be connected.
81244_4.book Page 314 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
