Chapter 2: General Operation 27
Disabled data/functions
When Password Protection is ON and you have not entered a password you will be
unable to:
• View details of waypoint and route databases.
• Edit waypoints or routes.
• Goto an existing waypoint.
• Follow a route.
• View waypoints on screen (even when the SHOW/HIDE status is set to SHOW).
• View waypoint names on screen (even when WAYPOINT NAME is set to ON).
All other options including GOTO CURSOR are unaffected.
Setting up a password
To setup a password:
1. Select Waypoint Password Setup:
2. Change the Enable Password status to ON, read and accept the warning:
3. Enter a password and confirm it:
MENU
D8954_1
Highlight required
System Setup Menu
Select System Setup
Menu
Highlight Waypoint
Password Setup
Select Waypoint
Password Setup
System Setup Menu
System Integration
Waypoint Password Setup
Setup
Radar Setup...
GPS Status...
Compass Setup...
System Setup...
OK
D8962_1
Select ON.
Select Enable
Password
Waypoint Password Setup
Change Password...
Ena
e Passwor
N
Read and accept
the warning
Setting Password Protection
required a password to access
your waypoint and route
databases.
If you forget your password you
will lose your waypoints and
routes
Raymarine recommends that you
archive your waypoints and
routes
YES
81244_4.book Page 27 Thursday, January 31, 2008 1:53 PM
To Next Page
Loading...
