MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
8540780 • 25/01/2023 • Rev.43 61
Master MOSAIC M1S (Figure 20)
Table 29 - Opening Screen
ON =
MOSAIC M1
connected to PC
OFF=otherwise
RED with output OFF
GREEN with output ON
YELLOW waiting for restart
BLINKING YELLOW with
inconsistent feedback (if
required)
â–ª Status signal
programmed as
STATUS:
OUTPUT condition
â–ª Status signal
programmed as
FBK/RST:
INPUT condition
ON
incorrect
external
connection
detected
ON =
MOSAIC M1
connected to PC
OFF=otherwise
only the number of the
INPUT with the incorrect
connection flashes
Table 30 - Dynamic Screen
Writing/loading/ diagram
to/from MCM card
MSD requesting connection:
internal configuration not present
MSD requesting connection:
(slave module or node number
not correct) (ref. System composition)
MSD requesting connection:
(slave module missing or not ready)
(ref. System composition)
MSD connected MOSAIC M1 stopped
To Next Page
Loading...
Need help?
General
