MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
62 8540780 • 25/01/2023 • Rev.43
Master MOSAIC M1S COM (Figure 20)
Table 31 - Opening Screen
Table 32 - Dynamic Screen
Figure 22 -
MOSAIC M1S COM
Writing/loading/ diagram
to/from MCM card
MSD requesting connection:
internal configuration not
present
MSD requesting connection:
(slave module or node number
not correct) (ref. System
composition)
MSD requesting connection:
(slave module missing or not
ready)
(ref. System composition)
MSD connected
MOSAIC M1S COM stopped
MOSAIC M1S COM new Fieldbus
loading
Flashes quickly
and alternatively
ON =
MOSAIC M1S COM
connected to PC
OFF=otherwise
RED with output OFF
GREEN with output ON
YELLOW waiting for
restart
BLINKING YELLOW with
inconsistent feedback (if
required)
â–ª Status signal
programmed as
STATUS:
OUTPUT condition
â–ª Status signal
programmed as
FBK/RST:
INPUT condition
ON
incorrect
external
connection
detected
ON =
MOSAIC M1S COM
connected to PC
OFF=otherwise
only the number of
the INPUT with the
incorrect
connection flashes
To Next Page
Loading...
Need help?
General
