MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
98 8540780 • 25/01/2023 • Rev.43
Shows the
physical
address of the
unit
• Return the unit to ReeR to be repaired
• Wrong MASTER firmware version, return MASTER unit to
ReeR in order to update the firmware.
Communication
error with MASTER
• Reboot the system
• If reboot does not work return the unit to ReeR
Error on other
slave or MASTER
• Restart the system
• Check which unit is in FAIL mode
Same type of slave
with same address
detected
• Change the unit address (see NODE SEL)
Wrong configuration
received
• Check field bus connection.
Channel configured as SINGLE or not configured at all
Shows the
physical
address of the
unit
• Check sensor connections
• Check sensor status
• Check sensor connections
• Check sensor status
Read value over
threshold
3 fast
flashes and
a pause of
600 ms
• Check sensor connections
• Check sensor status
• Check threshold values set with MSD software
Read value under
threshold
3 fast
flashes and
a pause of
600 ms
• Check sensor connections
• Check sensor status
• Check threshold values set with MSD software
3 fast
flashes and
a pause of
600 ms
• Check sensor connections
• Check sensor status
To Next Page
Loading...
Need help?
General
