1
USER GUIDE
OVERVIEW
SMART-SENSOR
™
2004 – 2014 Reliable Controls
®
Corporation. All rights reserved.
OVERVIEW
The Reliable Controls
®
SMART-Sensor
™
(SS) is a powerful and dynamic microprocessor-based sensor
that monitors room environmental conditions, and communicates the information back to
MACH-System controllers via SMART-Net
™
. SMART-Sensor
™
LCD (SS-L) models also include the ability
to display and adjust setpoints and other control points located in MACH-System controllers.
FIGURE 1: SMART-SENSOR
™
SS-UD, SS-L-D/W, SS-P, SS-DUCT-PB, AND SS-DUCT-GD
SS FEATURES INCLUDE:
•
Network up to 16 SMART-Sensors on a single SMART-Net
™
network depending
on the host controller type,
• Fully compatible with all generations of MACH-System controllers,
• Optional LCD display, humidity, CO
2
, occupancy, 2 Input/2 Output, degree C/F
switch, override button, and setpoint slider.
•
(SS-L) Display up to ten points from any Reliable Controls
®
MACH-System
controller, located anywhere in the system,
•
(SS-L) Adjust up to ten points from the SMART-Net
™
host, which can be any
Reliable Controls
®
MACH-System controller,
• (SS-L) Access, view, and adjust data easily with the three-button interface and
large three-row LCD display,
SS-L-D/W
SS-P
SS-DUCT-PB
SS-DUCT-GD
SS-UD
To Next Page
Loading...
