Reliable Controls SS-P - Ordering Options

18
 2004 – 2014 Reliable Controls
®
Corporation. All rights reserved.
ORDERING OPTIONS
In addition to the dedicated onboard temperature sensor, Table 1 lists the standard
ordering options that are available.
TABLE 1: STANDARD ORDER OPTIONS
Option Description
-BL Adds backlight and transflective LCD to -L models
-CO2
Adds
CO
2
sensor (not available with -P and -DUCT models)
-D Adds °C/°F slide switch to toggle display units to -L models only
-EH-RH Adds Euro Housing and humidity sensor to -DUCT models
-H Adds humidity sensor to SS and SS-L models
-IO Adds 2 inputs and 2 TRIAC outputs (not available on -P models)
-L Adds LCD to base model
-O Adds override button (not available on -DUCT, -S models)
-OC Adds PIR motion sensor (not available on -P, -DUCT models)
-S Adds setpoint slider (not available on -UD, -P, -DUCT models)
-UD Adds setpoint up and down buttons (not available on -P, -DUCT,
-S models)
-P Converts to Plate model
-DUCT Converts to Duct model
-PB Adds black plastic duct mount
-GD Adds galvanized metal duct mount
-## Specifies duct probe length in inches: 4, 6, 8, 12, 18
/W For white enclosure, leave blank for standard warm gray color