Reliable Controls SS-P - Specifications; Power; Display (Ss-L Only ); Network

112
 2004 – 2014 Reliable Controls
®
Corporation. All rights reserved.
SPECIFICATIONS
P
OWER
DISPLAY (SS-L ONLY)
NETWORK
COMMISSIONING/PROGRAMMING
Supply Voltage Base SS or SS-L: 5 VDC @ 5 mA
-IO adds 10 mA
-CO2 adds 2 mA
-BL adds 10 mA
LCD 132-segment LCD, 12 o'clock viewing angle
Viewable Area
36 mm x 36 mm (1
3
/8” x 1
3
/8”)
Network
SMART-Net
™
Ports
Two RJ11 SMART-Net
™
ports (not available on -CO2, -DUCT,
and -P models)
One 6-wire SMART-Net
™
terminal block (4-wire terminal block
on SS-DUCT and SS-P models)
One RJ11 SMART-Net
™
access port (not available on -S,
-DUCT, and -P models)
Communication
X-Port-2
™
converter or EIA-485 and SMART-Net
™
network
Software
RC-Studio
®
2.0