RL78/G13 CHAPTER 22 SAFETY FUNCTIONS
R01UH0146EJ0100 Rev.1.00 919
Sep 22, 2011
Notes 1. 20-, 24-, 25-, 30-, 32-pin products: P01/ANI16 pin
2. 20-, 24-, 25-, 30-, 32-pin products: P00/ANI17 pin
Cautions 1. Be sure to clear bits 5 and 6 to 0.
2. Only rewrite the value of the ADISS bit while A/D voltage comparator operation is stopped (which
is indicated by the ADCS bit of A/D converter mode register 0 (ADM0) being 0).
3. If using AV
REFP as the + side reference voltage source of the A/D converter, do not select ANI0 as
an A/D conversion channel.
4. If using AV
REFM as the − side reference voltage source of the A/D converter, do not select ANI1 as
an A/D conversion channel.
5. If ADISS is set to 1, the internal reference voltage (1.45 V) cannot be used for the + side reference
To Next Page
General
