DURADRIVE Drive Controllers DURADRIVE HDC01.1 Drive Controller 4-5
DOK-DURADR-HDC01.1****-PR02-EN-P
Designation Symbol Unit HDC01.1-AXXXN
Permissible ambient and air inlet
temperature for the output ratings
T
A
°C +5 ... +45
Storage and shipping temperatures T
L
°C -30 ... +85
Max. allowed installation altitude for
the output ratings
m 1000
Max. allowed installation altitude m 2000
Max. permissible relative humidity % 95
Max. permissible absolute humidity g/m³ 25
Allowed degree of contamination 2, according to EN 50178
fine dust not allowed, no condensation
Type of protection IP20, according to EN 60529 = DIN VDE 0470-1-1992 (ICE 529-1989)
EMI noise emission Klasse A, Gruppe 2, according to DIN EN 61800-3
EMI noise immunity according to DIN EN 61800-3; section 5.2
Vibration sinus in operation according to EN 60068-2-6
Amplitude and Frequency 0.3 mm (peak-to-peak) at 5 ... 57 Hz
2 g at 57 ... 500 Hz
Tolerance % ± 15
Vibration distortion (Random) in operation according to IEC 68-2-36
Frequency Hz 20 ... 500
Spectral acceleration density
amplitude
g
2
/Hz 0.01
Tolerance dB ± 3
Virtual value (r.m.s.) of the total
acceleration
g2.2
Shock check not in operation according to EN 60068-2-27
Halve sine in 3 axis 15 g / 11 ms
Fig. 4-5: Ambient and operating conditions
Note: The user must check whether the ambient conditions,
especially the temperature, are observed.
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
