DURADRIVE Drive Controllers Index 13-1
DOK-DURADR-HDC01.1****-PR02-EN-P
13 Index
2
24V control voltage supply (+24V and 0V) 4-26
A
A look at the drive controller and connector designations 4-21
activation power ON 4-56
Activation power ON 4-60
Additional Accessories 9-3
allowed DC bus continuous power 4-16
allowed DC bus peak power 4-16
allowed encoder cable lengths 4-53
Ambient and operating conditions 4-5
An overview of individual components of the DURADRIVE family 1-3
An overview of the communications interfaces 1-5
An overview of the drive controllers 1-4
Analog inputs 4-36
analog inputs 1 and 2 4-36
analog outputs 1 and 2 4-37
Appropriate use
Introduction 2-1
autotransformer 6-1
B
basic connection of holding brake 4-45
basic connection of motor power 4-45
basic connection of motor temperature monitoring 4-45
Bb 4-56, 4-59, 7-2
HDC 4-59
bending radius 8-6
Block diagram of the HDC01.1 power section 4-7
BR+, BR- 4-44
bus cable length
X10 4-56
bus connector 4-71
C
cable diameter 4-24
cam1/ MessT1 4-32
cam2/ MessT2 4-32
cams 4-33
CANopen Interface 4-77, 4-78
CE label 4-20
cleaning 12-8
clear error 4-32
HDC 4-33
Commissioning Aids 9-3
computing phase current on the mains 7-5
computing starting current inrush 7-5
connecting the measuring system 4-40
connecting the measuring systems 1-6
Connecting the systems to the encoder inputs 1-6
connection cross section
X10 4-55
X11 4-56
X2 4-28
X3 4-32
X30 4-69
X4 4-38
X40 4-74
X41 4-74
X50 4-77
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page