9 March 2004 SERVICE PROGRAM
5-35
Service
Tables
5508
* CC Call
Jam Remains [0: Disable,
1:
Enable] 5508 1*
Enables/disables initiating a call for an unattended paper jam.
Continuous Jams [0: Disable,
1:
Enable] 5508 2*
Enables/disables initiating a call for consecutive paper jams.
Continuous Door Open [0: Disable, 1: Enable] 5508 3*
Enables/disables initiating a call when the front door remains open.
Low Call Mode [0: Normal mode,
1:
Reduced mode] 5508 4*
Enables/disables the new call specifications designed to reduce the number of
calls.
Jam Detection: Time Length [03~30 /
10
/ 1/step] 5508 11*
Sets the time a jam must remain before it becomes an ”unattended paper jam”.
This setting is enabled only when SP5508 004 is set to 1.
Jam Detection: Continuous Count [02~10 /
5
/ 1/step] 5508 12*
Sets the number of consecutive paper jams required to initiate a call. This setting
is enabled only when SP5508 004 is set to 1.
Door Open: Time Length [03~30 /
10
/ 1/step] 5508 13*
Sets the length of time the door remains open before the machine initiates a call.
This setting is enabled only when SP5508 004 is set to 1.
CC Call: Long Time Jam [0 = Auto call /
1
= Alarm] 5508 21
Selects the machine reaction to long time jams.
CC Call: Continuous Jam [0 = Auto call /
1
= Alarm] 5508 22
Selects the machine reaction to continuous jams.
CC Call: Door Open [0 = Auto call /
1
= Alarm] 5508 23
Selects the machine reaction to door open.
5801
Memory Clear
5801 1 All Clear
Executes the following memory clears at the
same time: SP5-801-2 through 12.
5801 3 SCS Initializes the system-control-service settings.
5801 4 IMH Memory Clear Initializes the image-memory-handler settings.
5801 5 MCS Initializes the memory-control-service settings.
5801 6 Copier application Initializes the copier-application settings.
5801 7 Fax application Initializes the fax-application settings.
5801 8 Printer application Initializes the printer-application settings.
5801 9 Scanner application Initializes the scanner-application settings.
5801 10
Web service/Network
application
Deletes the network file application management
files and thumbnails, and initializes the job login
ID.
5801 11 NCS
Initializes the network-control-service settings:
the system defaults and interface settings
(including IP addresses), Smart Net Monitor for
Administrator, Web Status Monitor settings, and
the TELNET settings.
5801 12 R-Fax
Initializes the job log in ID, Smart Net Monitor for
Administrator, job history, and local storage file
numbers.
5801 14 Clear DCS Settings
5801 15 Clear UCS Settings
To Next Page
Loading...
