IFAX SWITCH 9 March 2004
3-4
SP IFAX SW
03 1102 4
Not used
SP IFAX SW
1102 5 04
Bit 0
: Subject for Delivery TX/Memory Transfer
This setting determines whether the RTI/CSI registered on this machine or the RTI/CSI
of the originator is used in the subject lines of transferred documents.
0: Puts the RTI/CSI of the originator in the Subject line. If this is used, either the RTI
or CSI is used. Only one of these can be received for use in the subject line.
1: Puts the RTI/CSI registered on this machine in the Subject line.
When this switch is used to transfer and deliver mail to a PC, the information in the
Subject line that indicates where the transmission originated can be used to determine
automatically the destination folder for each e-mail.
Bits 1
: Subject for main-post DB
Japan Only
0: Ordinary subject
1: Subject for mail-post DB
The IFAX machine attaches the subject for mail-post DB to the facsimile message
under some conditions.
Bits 2~7
: Not used
SP IFAX SW
1102 6 05
Bit 0
: Mail Addresses of SMTP Broadcast Recipients
Determines whether the e-mail addresses of the destinations that receive
transmissions broadcasted using SMTP protocol are recorded in the Journal.
For example:
‘1st destination + Total number of destinations: 9’
in the Journal indicates a broadcast to 9 destinations.
0: Not recorded
1: Recorded
Bits 1~7
: Not used
SP IFAX SW
06 1102 7
Not used
SP IFAX SW
07 1102 8
Not used
To Next Page
Loading...
