Message Causes Solutions
"Transmission cannot be
performed because the
certificate for encryption is
not currently valid."
The user certificate
(destination certificate) has
expired.
A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide .
"XXX cannot be YYY
because the device
certificate used for the S/
MIME signature is not
currently valid."
(XXX and YYY indicate the
user action.)
The device certificate (S/
MIME) has expired.
A new device certificate (S/MIME)
must be installed. For details about
how to install a device certificate (S/
MIME), see Security Guide .
"E-mail TX Result cannot be
set because the specified
destination's certificate is not
currently valid."
The user certificate
(destination certificate) has
expired.
For details about the user certificate
(destination certificate), see Security
Guide
.
"The program contains a
destination(s) that does not
have a certificate."
There is no user certificate
(destination certificate).
For details about the user certificate
(destination certificate), see Security
Guide .
"The specified destination for
E-mail TX Result, which is
registered to the program,
has no certificate for
encryption."
There is no user certificate
(destination certificate).
For details about the user certificate
(destination certificate), see Security
Guide .
"The specified destinations
for E-mail TX Result, which is
registered to the program,
contain a destination(s) that
has no certificate for
encryption."
There is no user certificate
(destination certificate).
For details about the user certificate
(destination certificate), see Security
Guide .
10. Troubleshooting
194