Ricoh Aficio MP C5502 User Manual

Enabling and Disabling Protocols
Specify whether to enable or disable the function for each protocol. By making this setting, you can
specify which protocols are available and so prevent unauthorized access over the network. Network
settings can be specified on the control panel, or using Web Image Monitor, telnet,
SmartDeviceMonitor for Admin or Remote Communication Gate S. If you use SmartDeviceMonitor for
Admin, start Web Image Monitor from SmartDeviceMonitor for Admin and configure the settings from
there.
Protocol Port Setting method When disabled
IPv4 -
• Control panel
•
Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
All applications that
operate over IPv4
cannot be used.
IPv4 cannot be
disabled from Web
Image Monitor when
using IPv4 transmission.
IPv6 -
• Control panel
•
Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
All applications that
operate over IPv6
cannot be used.
IPsec -
• Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
Encrypted transmission
using IPsec is disabled.
5. Enhanced Network Security
118

Ricoh Aficio MP C5502 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Multiple Copy	Up to 999 copies
Max Paper Capacity	4, 400 sheets
Duplex Printing	Yes
Hard Disk Drive	250 GB
Power Consumption (Maximum)	1.7 kW
Type	All in One Printer
Print Speed	55 pages per minute
Copy Speed	55 copies per minute
Zoom	25% to 400%
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Original Capacity	100 sheets
Standard Paper Capacity	1, 200 sheets
Memory	1.5 GB RAM
Interface	USB 2.0, Ethernet
Network Protocols	TCP/IP
Operating Systems Supported	Windows, Mac, Linux
Power Source	AC 120V, 60Hz
Paper Weight	52 – 256 g/m²