Ricoh Aficio MP C5502 - Managing Logs from the Log Collection Server

Disabling Log Transfer to the Log Collection Server
Use the following procedure to disable log transfer from the machine to the log collection server. Note
that you can change the log transfer setting to [Off] only if it is already set to [On].
For details about the log collection server, contact your sales representative.
For details about the transfer log setting, see the log collection server manual.
1. The machine administrator logs in from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] twice.
5. Press [Transfer Log Setting].
6. Press [Off].
7. Press [OK].
8. Log out.
Specifying Delete All Logs
1. The machine administrator logs in from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] twice.
5. Press [Delete All Logs].
6. Press [Yes].
7. Press [Exit].
8. Log out.
• Deleting all logs from the machine as a batch can be achieved by either using the log collection
server or via Web Image Monitor if the collection setting of one of the logs — job log, access log
or eco-friendly log is enabled.
Managing Logs from the Log Collection Server
For details about using the log collection server to manage Log Files, see the manual supplied with the
log collection server.
7. Managing the Machine
208