Ricoh Aficio MP C5502 User Manual

1. UNIX Configuration
This section explains how to set up a network printer and check print status using UNIX
Before Setup
• To print from a UNIX workstation, use a file that the printer supports.
• Setup varies depending on the print command. Make sure to configure settings accordingly.
Using the lp/lpr Commands
1. Use the installation shell script to register the device option, as well as the printer host
name and the IP address.
For details, see p.8 "Using the Installation Shell Script".
2. Start printing.
For details, see p.17 "Printing Method".
Using the rsh/rcp/ftp Commands
1. Edit the host file to register the printer host name and the IP address.
For details, see p.12 "After Executing the Installation Shell Script".
2. Start printing.
For details, see p.17 "Printing Method".
• If you cannot edit the host file, use the install shell script to register the host name.
7

Ricoh Aficio MP C5502 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Multiple Copy	Up to 999 copies
Max Paper Capacity	4, 400 sheets
Duplex Printing	Yes
Hard Disk Drive	250 GB
Power Consumption (Maximum)	1.7 kW
Type	All in One Printer
Print Speed	55 pages per minute
Copy Speed	55 copies per minute
Zoom	25% to 400%
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Original Capacity	100 sheets
Standard Paper Capacity	1, 200 sheets
Memory	1.5 GB RAM
Interface	USB 2.0, Ethernet
Network Protocols	TCP/IP
Operating Systems Supported	Windows, Mac, Linux
Power Source	AC 120V, 60Hz
Paper Weight	52 – 256 g/m²