Installing the Printer Driver for a Local
Connection
This section describes the installation procedure of the printer drivers for USB, parallel, or Bluetooth
connection.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
• If the [User Account Control] dialog box appears in driver installation procedure, click [Yes] or
[Continue].
• If the [Windows Security] dialog box appears in driver installation procedure, click [Install this
driver software anyway].
•
A message appears if there is a newer version of the printer driver already installed. If there is, you
cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add
Printer]. See p.49 "Messages Displayed When Installing the Printer Driver".
USB Connection
This section explains how to install the printer drivers using USB.
Before installing, check that only the operating system is running on the computer and no print jobs are
in progress.
If the printer driver has already been installed, and plug and play is enabled, the icon of the printer
connected to the "USB" port is added to the [Printers], [Printers and Faxes], or [Devices and Printers]
window.
If the printer driver is not installed, follow the plug-and-play instructions of the machine to install it from
the CD-ROM provided with this machine.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
Windows XP, Windows Server 2003/2003 R2
1. Quit all applications. (Do not close this manual.)
2. Check that the power of the machine is off.
Installing the Printer Driver for a Local Connection
27
To Next Page
Loading...
Need help?
General
