Exporting Device Information
When exporting device information from the control panel, the data is saved on an SD card.
1. Insert an SD card into the media slot on the side of the control panel.
2. Log in from the control panel as an administrator with all privileges.
3. Press [System Settings].
4. Press [Administrator Tools].
5. Press [ Next] three times.
6. Press [Device Setting Information: Export (Memry Strge Devc)].
7. Select the item(s) to export and set the export conditions.
• Select the device information to export from the "Export Range".
•
Select whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique
Information" includes the IP address, host name, fax number, etc.
• Select [On] or [Off] for "Encryption". If [On] is chosen, set up an encryption key.
8. Press [Run Export].
9. Press [OK].
10. Press [Exit].
11. Log out.
7. Managing the Machine
254
To Next Page
Loading...
