6. Configure the import conditions.
• Select the source for importing files. Configure settings such as the URL, user name, password,
etc., using the detail settings of the server.
•
Select the frequency for importing device setting information files and set the time used for a
periodic import at the specified time.
• Select whether or not to import a device setting information file if it is identical as compared to
the last imported file.
• When the device setting information file to be imported is encrypted, configure an encryption
key.
• Select whether or not to send e-mail notification to the machine administrator when importing
fails.
7. Press [OK].
8. Log out.
• This can also be configured from Web Image Monitor. For details, see Web Image Monitor Help.
•
When the managing device sever is used, more detailed import settings can be made. For further
details, refer to the user's manual of the managing device sever.
Manually Importing the Device Setting Information File of a Server
Manually import the device setting information file specified with [Device Setting Information: Import
Setting (Server)].
1. Log in from the control panel as an administrator with all privileges.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [
Next] three times.
Managing Device Information
257
To Next Page
Loading...
