Enabling the Function to Prevent Transmission
to the Wrong Destination
To enable the function to prevent transmission to the wrong destination, edit the configuration file before
you install the driver. This section explains how to edit the configuration file and install the LAN-Fax
driver using the edited configuration file.
Editing the Configuration File
1. Quit all applications. (Do not close this manual.)
2. Insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click [Close].
3. Copy the LAN-FAX driver in the provided CD-ROM to the hard disk of your computer.
If the drive letter of the CD-ROM drive is "D:", copy one of the following folders. Select either 32-
bit or 64-bit version according to the environment you are using. Do not copy the files to the
desktop or a directory whose path name contains multi-byte characters.
• 32-bit driver D:\X86\DRIVERS\LAN-FAX
•
64-bit driver D:\X64\DRIVERS\LAN-FAX
4. Open the file "IfxShLnk.ini" that has been copied to your computer using a text editor.
5. Edit the items that are related to the prevention function.
Edit the following three items:
• ConfirmFAXNo
Syntax: ConfirmFAXNo=0/1/2/3/4/5/6/7/8/9/10
Description: Specify the number of times the confirmation dialog box for reentering the
destination number appears. Enter the number of times to prompt the user to reenter the
destination from 0 to 10.
Example: ConfirmFAXNo=1
• ConfirmAddress
Syntax: ConfirmAddress=ON/OFF
Description: When set to "ON", the destination confirmation dialog appears.
Example: ConfirmAddress=ON
• ProhibitDirectAddress
Syntax: ProhibitDirectAddress=ON/OFF
Description: When set to "ON", the destination cannot be entered manually.
Example: ProhibitDirectAddress=ON
4. Installing the Facsimile Driver
44
To Next Page
Loading...
Need help?
General
