Integration Server Authentication
For external authentication, the Integration Server authentication collectively authenticates users
accessing the server over the network, providing a server-independent, centralized user authentication
system that is safe and convenient.
For example, if the delivery server and the machine share the same Integration Server authentication,
single sign-on is possible using DeskTopBinder.
To use Integration Server authentication, access to a server on which ScanRouter System or Remote
Communication Gate S and Authentication Manager are installed, other than the machine, is required.
For details about the software, contact your sales representative.
Using Web Image Monitor, you can specify that the server reliability and site certificate are checked
every time you access the SSL server. For details about specifying SSL using Web Image Monitor, see
Web Image Monitor Help.
• During Integration Server Authentication, the data registered in the server, such as the user's e-mail
address, is automatically registered in the machine. If user information on the server is changed,
information registered in the machine may be overwritten when authentication is performed.
•
The default administrator name for ScanRouter System and Remote Communication Gate S is
"Admin". This is different from the default administrator name for the machine, which is "admin".
Specifying Integration Server Authentication
Before beginning to configure the machine, make sure that administrator authentication is properly
configured under "Administrator Authentication Management".
1. The machine administrator logs in from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next].
2. Configuring User Authentication
58
To Next Page
Loading...
Need help?
General
