EasyManuals Logo

Ricoh Aficio MP C5502 User Manual

Ricoh Aficio MP C5502
830 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #407 background imageLoading...
Page #407 background image
The /etc/hosts file contains a list of IP addresses and host names of all hosts communicating on the
network. Each entry is delimited with a space or a tab, and each line is separated with a return.
If you do not use NIS or DNS, you must manually enter the IP address and host name of each
workstation using the network printer in the /etc/hosts file.
Registering the printer
The installation shell script registers the printer as a remote printer following the procedure below:
1.
If your workstation is Solaris 2.5.1, register the print server and print client to the print service.
# lpsystem -t bsd -R 0 -y Network Printer nphost
2. Register the printer as a remote printer.
# lpadmin -p np -s nphost!option -T dump -I any
"np" is the printer name, "nphost" is the host name. For details about "option", see p.22
"Specifying the Device Option".
"lp" will be assigned, if the option is not used.
When printing with the lp command, use ( _ ) instead of ( = ) and ( ; ) instead of ( , ) for
operating systems that cannot use ( = ) and ( , ) such as Solaris 2.5 or later.
3. If your workstation is Solaris 2.5.1, set the print job to active so it can be accepted by the print
queue.
/usr/lib/accept np
4. If your workstation is Solaris 2.5.1, set the print job to active to print.
/usr/lib/enable np
HP-UX
Adding the IP address and host name to the /etc/hosts file
The following line is added to the /etc/hosts file. The IP address and printer host name previously
entered in the installation script will be used:
192.168.15.16 np # Network Printer
"192.168.15.16" is the IP address, "np" is the host name, from # to the end of the line is the
comment.
The /etc/hosts file contains a list of IP addresses and host names of all hosts communicating on the
network. Each entry is delimited with a space or a tab, and each line is separated with a return.
If you do not use NIS or DNS, you must manually enter the IP address and host name of each
workstation using the network printer in the /etc/hosts file.
Using the Installation Shell Script
15

Table of Contents

Other manuals for Ricoh Aficio MP C5502

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio MP C5502 and is the answer not in the manual?

Ricoh Aficio MP C5502 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Max Print Resolution1200 x 1200 dpi
Copy Resolution600 x 600 dpi
Multiple CopyUp to 999 copies
Max Paper Capacity4, 400 sheets
Duplex PrintingYes
Hard Disk Drive250 GB
Power Consumption (Maximum)1.7 kW
TypeAll in One Printer
Print Speed55 pages per minute
Copy Speed55 copies per minute
Zoom25% to 400%
Scan Resolution600 dpi
Fax Resolution200 x 200 dpi
Original Capacity100 sheets
Standard Paper Capacity1, 200 sheets
Memory1.5 GB RAM
InterfaceUSB 2.0, Ethernet
Network ProtocolsTCP/IP
Operating Systems SupportedWindows, Mac, Linux
Power SourceAC 120V, 60Hz
Paper Weight52 – 256 g/m²

Related product manuals