Ricoh Aficio MP C5502 User Manual

• File names cannot contain "=", ",", or ";".
• You can use wild cards ( * or ? ) for the file name with the mput command.
To print one file
ftp> put file_name [Option]
To print several files
ftp> mput file_name [file_name...] [Option]
The following procedure shows an example of how to print a file using ftp.
It is not possible to set options with the mput command:
1. Start ftp using the IP address or host name of the printer.
% ftp IP_address
2. Enter the user name and password, and then press the [RETURN] ([ENTER]) key.
For details about the user name and password, consult your administrator.
Name:
Password:
3. Set the file transfer mode to binary.
ftp> bin
If the file transfer mode is not set to binary, the image may not be printed correctly.
4. Print the file.
For example, to print the file named file1:
ftp> put \path\file1
For example, to print the two files named file1 and file2:
ftp> mput \path\file1 \path\file2
5. Exit ftp.
ftp> bye
Printing Method
19

Ricoh Aficio MP C5502 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Multiple Copy	Up to 999 copies
Max Paper Capacity	4, 400 sheets
Duplex Printing	Yes
Hard Disk Drive	250 GB
Power Consumption (Maximum)	1.7 kW
Type	All in One Printer
Print Speed	55 pages per minute
Copy Speed	55 copies per minute
Zoom	25% to 400%
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Original Capacity	100 sheets
Standard Paper Capacity	1, 200 sheets
Memory	1.5 GB RAM
Interface	USB 2.0, Ethernet
Network Protocols	TCP/IP
Operating Systems Supported	Windows, Mac, Linux
Power Source	AC 120V, 60Hz
Paper Weight	52 – 256 g/m²