Placing Originals
10
1
Originals not recommended for the Auto Document Feeder (ADF)
Placing the following types of originals in the ADF can cause paper misfeeds or
result in damage to the originals. Place these originals on the exposure glass in-
stead.
• Originals other than those specified on p.9 “Sizes and Weights of Recom-
mended Originals”.
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, alu-
minum foil, carbon paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin originals that have low stiffness
• Thick originals such as postcards
• Originals of inappropriate weight
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
Note
❒ The original might become dirty if it is written on with a pencil or a similar
instrument.
Sizes Detectable by Auto Paper Select
❍ : Detectable size × : Undetectable size
❖
❖❖
❖ Metric version
*1
You can select from 8
1
/
2
" × 13", 8
1
/
4
" × 13", 8" × 13" with User Tools (System Settings).
*2
If you wish to switch detectable paper size from 8KL to 11" × 13"L, please contact
your service representative.
*3
If you wish to switch detectable paper size from 16KKL to 8
1
/
2
" × 11"KL, please
contact your service representative.
Size A3
L
B4
JIS
L
A4
K
L
B5
JIS
K
L
A5
K
L
B6
JIS
K
L
11"
×
17"
L
8
1
/
2
"
×
14"
L
8
1
/
2
"
×
11"
K
L
5
1
/
2
"
×
8
1
/
2
"
K
L
8
1
/
2
"
×
13"
L
*1
8K
L
16K
K
L
*3
Location of the
original
Exposure glass
❍❍❍❍ ××××××❍ ××
ADF
❍❍❍❍❍❍❍ × ❍ × ❍
❍
*2
❍
MartiniC2_EN_Copy-F1_FM.book Page 10 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
Need help?
General
