Settings You Can Change with User Tools
125
5
❖
❖❖
❖ Connect Copy Key Display
You can specify whether or not to
display the key for Connect Copy.
Note
❒ Default: Display
General Features P.
2
/
5
❖
❖❖
❖ Duplex Mode Priority
You can select the type of the Du-
plex function effective when the
power is turned on, or modes are
cleared.
Note
❒ Default: 1 Sided
→
2 Sided
❖
❖❖
❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effec-
tive when power is turned on, or
modes are cleared.
Note
❒ Default: Standard
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 999.
Note
❒ Default: 999 Sheets
❖
❖❖
❖ Tone: Original remains
The beeper (key tone) sounds if
you forget to remove originals af-
ter copying.
Note
❒ Default: On
❒ If Panel Tone in User Tools (Sys-
tem Settings) is [Off], the beeper
does not sound, whatever the
Tone: Original remains setting.
See “Panel Tone” in “General
Features”, General Settings
Guide.
❖
❖❖
❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ Default: On
❒ If Panel Tone of User Tools (Sys-
tem Settings) settings is [On], the
machine beeps to notify you
that it did not complete a job for
reasons such as: the paper tray
ran out of paper, or a paper mis-
feed occurred.
General Features P.
3
/
5
❖
❖❖
❖ Copy Function Key: F1-F5
You can assign frequently used
functions to function keys F1 to F5.
Note
❒ Default:
• Copy Function Key: F1: 1
Sided
→
2 Sided: T to T
MartiniC2_EN_Copy-F1_FM.book Page 125 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
