Ricoh DSm651 - Initializing the Printer Disk; Page Setup; Printing Font Catalog

Printer Utility for Mac
112
4
Initializing the Printer Disk
When initializing the printer's hard disk drive, all the fonts downloaded to the
printer's hard disk drive are deleted. Before initializing, be sure to check the
fonts on the hard disk drive.
Important
❒ When initializing the printer's hard disk drive from the operation panel, all of
the data on the printer's hard disk drive is deleted. Before initializing, be sure
to check the data on the hard disk drive.
A
AA
A
Select [Initialize Printer's Disk...] on the [File] menu.
The confirmation message appears.
Note
❒ To cancel initialization, click [Cancel].
B
BB
B
Click [Execute].
Initializing starts.
Important
❒ Do not turn off the power switch until initializing is completed, otherwise
the hard disk drive might be damaged.
C
CC
C
When the completion message appears, click [OK].
Page Setup
You can set the paper size on which to print “Print Fonts Catalogue” and “Prints
Fonts Sample”.
A
AA
A
Select [Page Setup...] on the [File] menu.
B
BB
B
Choose the paper size.
Printing Font Catalog
Print the names of fonts available on the printer.
Note
❒ The paper selected under [Page Setup] is used.
A
AA
A
Select [Print Fonts Catalogue] on the [File] menu.
B
BB
B
Click [Print].