Ricoh DSm651 - Connecting Two Machines for Copying; Using the Scanner in a Network Environment

iv
Connecting Two Machines for
Copying
You can connect two machines to-
gether. When you set up a copy job on
one machine (the main machine),
data is transferred to the other (the
sub-machine) so that copies can be
made on both machines simulta-
neously (Connect Copy).
• You can complete large volume
copy runs in shorter time. See Copy
Reference.
• Even if one machine runs out of
paper, or stops because of a paper
jam, the other machine can still
continue to finish the job. See Copy
Reference.
Using the Scanner in a
Network Environment
• You can send scanned documents
to other network computers using
e-mail (Sending stored scan file by
e-mail). See Scanner Reference.
• With the ScanRouter delivery soft-
ware, you can store scanned docu-
ments in specified destinations on
network computers (File storage).
See Scanner Reference.
• You can send scanned documents
to other network folders (Scan to
Folder). See Scanner Reference.
ADH023S
ADH019S
MartiniC2_ENzen_F_pre_FM.book Page iv Tuesday, July 27, 2004 1:24 PM