Copier/Document Server Features on Main and Sub-machines
101
3
Copier/Document Server Features on
Main and Sub-machines
This section explains the Copier/Document Server Features on the two ma-
chines during Connect Copy.
Reference
See p.115 “User Tools (Copier/Document Server Features)”.
Note
❒ In Connect Copy mode, the User Tools/Counter key on the sub-machine is
disabled. To access User Tools on the sub-machine, first exit from Connect
Copy mode.
❍: The main and sub-machines are independent from each other.
←: The settings on the main machine applies to both machines.
—: Not related to the settings.
$: Depends on the function.
User Tools Item Names Main ma-
chine
Sub-ma-
chine
Remarks
General Features
Auto Paper Select Priority
❍
— Trays with paper of the same size
and orientation are selected from
the main and sub-machines auto-
matically.
Auto Tray Switching
❍❍
The sub-machine displays the pa-
per type regardless of the setting.
Paper Display
❍
—
Original Type Priority
❍
—
Original Type Display
❍
—
Auto Image Density Priority
❍
—
Copy Quality
❍❍
The same level should be selected
on both machines.
Image Density
❍❍
Each machine uses its settings.
Connect Copy Key Display
❍❍
Duplex Mode Priority
❍
—
Copy Orientation in Duplex Mode
❍
—
Original Orientation in Duplex Mode
❍
—
Change Initial Mode
❍
—
Max. Copy Quantity
❍
—
Tone: Original remains
❍
—
MartiniC2_EN_Copy-F1_FM.book Page 101 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
