Installing the Printer Driver Using USB
47
2
Troubleshooting USB
Problems Solutions
The machine is not automatically recognized. Turn off the power of the machine, reconnect
the USB cable, and then turn it on again.
Windows has already configured the USB set-
tings.
Open Windows' Device Manager, and then,
under [Universal Serial Bus controllers], remove
any conflicting devices. Conflicting devices
have a yellow [!] or [?] icon by them. Take care
not to accidentally remove required devices.
For details, see Windows Help.
Note
❒ When using Windows 2000/XP or Win-
dows Server 2003, an erroneous device is
displayed under [USB Controller] in the [De-
vice Manager] dialog box.
MartiniC25-EN-Pref-F_FM_ZF.book Page 47 Tuesday, July 27, 2004 11:51 AM
To Next Page
Loading...
