Settings You Can Change with User Tools
135
5
Note
❒ Default:
• Finisher 3000B (100-sheet sta-
ples): Top Slant
• Finisher 3000M (50-sheet sta-
ples): Top Slant
• Booklet finisher: Saddle Stitch
❒ The optional finisher is required
to use this function.
❖
❖❖
❖ Select Stapling Position (Top Right)
Specify which the type of stapling
to be shown on the bottom right
key of the initial display.
Note
❒ Default: Top 2
❒ The optional finisher is required
to use this function.
❖
❖❖
❖
Select Stapling Position (Bottom Right)
Specify which the type of stapling
to be shown on the bottom right
key of the initial display.
Note
❒ Default: Left 2
❒ The optional finisher is required
to use this function.
Input/Output P.
2
/
2
❖
❖❖
❖ Select Stack Function
Specify whether Stack or Rotate
Sort has priority on the initial dis-
play.
Note
❒ Default: Stack
❒ The optional finisher is required
to use this function.
❖
❖❖
❖ Select Punch Type
Specify which the type of punch to
be shown on the initial display.
Note
❒ Default: 2 Holes
❒ The optional finisher is required
to use this function.
❖
❖❖
❖ Letterhead Setting
If you select [Yes] for this function,
the machine rotates images cor-
rectly.
Note
❒ Default: No
❒ Orientation-fixed (top to bot-
tom) or two-sided paper might
not print correctly depending
on how the originals and paper
are placed.
Reference
When using letterhead paper,
pay attention to the paper orien-
tation. See “Orientation–Fixed
Paper or Two-Sided Paper” in
“Loading Paper”, General Set-
tings Guide.
❖
❖❖
❖ Eject Copy Face Up/Down in Glass
Mode
You can specify the way in which
copies are delivered when copying
an original placed on the exposure
glass.
MartiniC2_EN_Copy-F1_FM.book Page 135 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
