Copier Functions
37
2
A
AA
A
Press [Stack].
B
BB
B
Enter the number of copies using
the number keys.
C
CC
C
Place the originals, and then press
the {
{{
{Start}
}}
} key.
Note
❒ When placing originals on the
exposure glass, start with the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
Staple
Individual copy sets can be stapled.
Important
❒ If you select Saddle Stitch without
having the stapler cartridge for
Saddle Stitch set in the booklet fin-
isher, a paper misfeed might occur.
Note
❒ You cannot use the bypass tray
with this function.
Reference
p.134 “Select Stapling Position
(Top Left)”
p.134 “Select Stapling Position
(Bottom Left)”
p.135 “Select Stapling Position
(Top Right)”
p.135 “Select Stapling Position
(Bottom Right)”
Stapling position and original setting
Place all the originals in an orienta-
tion in which they can be read. They
will be automatically rotated for
copying. When using the exposure
glass, keep the same orientation, but
set the originals facing down. When
copy paper is identical in size and ori-
entation to the original, staple posi-
tions are as follows:
❖
❖❖
❖ Finisher 3000B (100–sheet staples)
Original logation
Exposure
glass
Document
Feeder
Stapling
position
Top
Top slant
Bottom
Left 2Top 2
MartiniC2_EN_Copy-F1_FM.book Page 37 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
