Ricoh DSm651 - Setting up as a Print Server (Netware 4.X, 5;5.1, 6;6.5)

Using NetWare
57
3
Setting Up as a Print Server
(NetWare 4.x, 5/5.1, 6/6.5)
Follow the procedure below to con-
nect the printer as a print server using
NetWare 4.x, NetWare 5/5.1, or Net-
Ware 6/6.5.
Important
❒ When using the printer as a print
server in NetWare 4.x, NetWare
5/5.1, or NetWare 6/6.5, set it to
the NDS mode.
❒ When using NetWare 5/5.1 or Net-
Ware 6/6.5, set the printer as a print
server.
A
AA
A
Log on to the file server as a su-
pervisor or supervisor equivalent.
B
BB
B
Start NIB Setup Tool on the [Start]
menu.
C
CC
C
Click [Wizard], and then click [OK].
D
DD
D
Select a printer you want to con-
figure.
E
EE
E
Enter the printer name in the [De-
vice name:] box and a comment in
the [Comment] box, and then click
[Next].
F
FF
F
Select the [NetWare] check box,
and then click [Next].
G
GG
G
Click [NDS mode], enter the file
server name in the [File Server
Name:] box, the NDS tree name in
the [NDS Tree] box, and the context
in the [NDS Context:] box, and then
click [Next].
In the [File Server Name:] box, enter
the name of the file server in which
a print server is created. You can
also click [Browse...] to browse
through available file servers and
NDS context names.
In the [NDS Tree] box, enter the name
of the NDS tree in which a print serv-
er is created using up to 32 alphanu-
meric characters. Hyphens and
underscores can also be used. You
can also click [Browse...] to browse
through available NDS trees.
For a context, object names are en-
tered from the lowest object with
each object separated by a period.
For example, if you want to create
a print server in NET under DS, en-
ter "NET.DS".
H
HH
H
Enter the print server name in the
[Print Server Name:] box, the printer
name in the [Printer Name:] box, the
print queue name in the [Print
Queue Name] box, and the print
queue volume in the [Print Queue
Volume] box, and then click [Next].
• In the [Print Server Name:] box, en-
ter the name of the NetWare print
server using up to 47 characters.
• In the [Printer Name:] box, enter
the name of the NetWare printer.
• In [Print Queue Name] box, enter
the print queue volume.
• In [Print Queue Volume], type the
print queue volume. For a vol-
ume, object names are entered
from the lowest object with each
object separated by a period. You
can also click [Browse...] to browse
through available volumes.