Printing a Document
91
3
Duplex Printing
Use this function to select duplex printing.
Limitation
❒ To use this function, the optional duplex unit must be installed on the ma-
chine.
The following table shows the tabs or menus where you can select this function.
You can select the following items: The following items may vary depending on
the operating system you are using.
Windows 95/98/Me
❖
❖❖
❖ Off
Disables Duplex Printing.
❖
❖❖
❖ Open to Left
Prints output so that you can open it to the left.
❖
❖❖
❖ Open to Top
Prints output so that you can open it to the top.
Windows 2000/XP, Windows Server 2003, Mac OS, Mac OS X
Note
❒ If you use a Mac OS, click to select the button that means “Flip on Long Edge”
or “Flip on Short Edge”.
❖
❖❖
❖ None
Disables Duplex Printing.
❖
❖❖
❖ Flip on Short Edge
Prints output so that you can open it to the short edge when bound along the
short edge.
❖
❖❖
❖ Flip on Long Edge
Prints output so that you can open it to the long edge when bound along the
long edge.
Windows 95/98/Me [
Duplex:
] on the [
Setup
] tab.
Windows 2000/XP,
Windows Server 2003
[
Print on Both Sides (Duplex)
] on the [
Layout
] tab in the
Printing Preferences dialog box.
Windows NT 4.0 [
Print on Both Sides (Duplex Printing)
] on the [
Page Setup
] tab
in the Document Defaults dialog box.
Mac OS [
Print on Both Sides
] on [
Layout
] in the print dialog box.
Mac OS X The [
Print on both Sides
] check box on [
Duplex:
] in the print
dialog box.
To Next Page
Loading...
