Connect Copy
90
3
❖
❖❖
❖ When copying with the Stack function
(Example) Making 2 copies of each
page of a three-page original
1.
Main machine
2.
Sub-machine
Copies are delivered face-down on
both the main and sub machines.
Copies are delivered as shown in
the above illustration.
-
--
-Auto Reset when using
Connect Copy
The machine exits Connect Copy
mode automatically and returns to
the initial condition after a certain pe-
riod of time has lapsed after job com-
pletion. This is called “Auto Reset”.
Note
❒ Auto Reset is based on the Auto
Reset Timer settings in User Tools
of the main machine.
❒ When the Auto Reset time of the
sub-machine lapses when it is pro-
cessing an Interrupt Copy job, the
sub-machine will return to its orig-
inal position and the Interrupt
Copy job will be cancelled.
-
--
-Auto Off
The machine automatically turns it-
self after a certain period of time has
lapsed after job completion. This is
called “Auto Off”. In Connect Copy
mode, the sub-machine will not turn
off automatically.
Reference
“Auto Off Timer”, General Settings
Guide
Exiting Connect Copy
A
AA
A
Press [] on the main ma-
chine.
The machine returns to standard
copying mode.
Note
❒ Settings made on the main ma-
chine during Connect Copy
mode remain effective.
❒ If you press the {
{{
{Clear Modes}
}}
}
key on the main machine, Con-
nect Copy mode is cancelled
and the main machine returns
to its initial condition.
< 1 > < 2 >
MartiniC2_EN_Copy-F1_FM.book Page 90 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
