Ricoh DSm651 - Page 313

Settings You Can Change with User Tools
127
5
❖
❖❖
❖ Enlarge 1-5
You can customize available en-
largement ratios by pressing [
Re-
duce/Enlarge], followed by [Enlarge].
Note
❒ Default:
• Metric version:
• Enlarge 1: 115%
• Enlarge 2: 122%
• Enlarge 3: 141%
• Enlarge 4: 200%
• Enlarge 5: 400%
• Inch version:
• Enlarge 1: 121%
• Enlarge 2: 129%
• Enlarge 3: 155%
• Enlarge 4: 200%
• Enlarge 5: 400%
❒ When selecting [User Enlrg. Ra-
tio], enter a ratio using the num-
ber keys (in the range of 101 to
400%).
❖
❖❖
❖ Priority Setting: Enlarge
You can set the ratio with priority
when [
Reduce/Enlarge
] is pressed,
followed by [Enlarge].
Note
❒ Default:
• Metric version: 141%
• Inch version: 155%
Reproduction Ratio P.
2
/
2
❖
❖❖
❖ Reduce 1-6
You can customize available re-
duction ratios by pressing [Re-
duce/Enlarge], followed by [Reduce].
Note
❒ Default:
• Metric version:
• Reduce 1: 25%
• Reduce 2: 50%
• Reduce 3: 65%
• Reduce 4: 71%
• Reduce 5: 75%
• Reduce 6: 82%
• Inch version:
• Reduce 1: 25%
• Reduce 2: 50%
• Reduce 3: 65%
• Reduce 4: 73%
• Reduce 5: 78%
• Reduce 6: 85%
❒ When selecting [User Redc.Ra-
tio], enter a ratio using the num-
ber keys (in the range of 25 to
99%).
❖
❖❖
❖ Priority Setting: Reduce
You can set the ratio with priority
when [Reduce/Enlarge] is pressed,
followed by [Reduce].
Note
❒ Default:
• Metric version: 71%
• Inch version: 73%
Enlarge1 Enlarge2 Enlarge3 Enlarge4 Enlarge5
Reduce1 Reduce2 Reduce3 Reduce4 Reduce5 Reduce6
MartiniC2_EN_Copy-F1_FM.book Page 127 Tuesday, July 27, 2004 1:43 PM