Specifications
150
6
❖
❖❖
❖ Duplex
• You cannot use the following copy paper with this function:
• Paper smaller than A5, 5
1
/
2
" × 8
1
/
2
" (possible on A5K, 5
1
/
2
" × 8
1
/
2
"K)
• Paper thicker than 105 g/m
2
, 28 lb.
• Paper thinner than 60 g/m
2
, 17 lb.
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Postcards
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
❖
❖❖
❖ Combine
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it will be automatically
adjusted to within acceptable range. However, with some ratios, parts of
the image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment will be left blank as shown.
❖
❖❖
❖ Copying Book Originals
• The machine sets the reproduction ratio automatically to meet paper size
and copies originals together onto the paper.
• The machine uses ratios in the range of 25 to 400%
• If the calculated ratio is under the available minimum, it will be adjusted
to minimum ratio. However, with some ratios, parts of the image might
not be copied.
MartiniC2_EN_Copy-F1_FM.book Page 150 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
