Preparing the Machine
20
2
I
II
I
Click [Exit] in the first dialog box of the installer, and then take out the CD-
ROM.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete. Restart the computer, and then reinstall the other soft-
ware or printer drivers.
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒ Select a machine to whose IP address is displayed in [
Connect To
] to install
SmartDeviceMonitor for Client when using TCP/IP.
Reference
Quick Install is not available unless bidirectional communication between
the machine and computer is enabled via parallel connection. See p.60 “If
Bidirectional Communication is Disabled” for details about bidirectional
communication between machine and computer.
MartiniC25-EN-Pref-F_FM_ZF.book Page 20 Tuesday, July 27, 2004 11:51 AM
To Next Page
Loading...
