Other Print Operations
100
4
Note
❒ Collate cannot be set when using slip sheets.
❒ Slip sheets cannot be inserted while duplex printing.
❒ The slip sheet should be the same size and orientation as the main paper.
❒ If “Auto Tray Select” has been set as the paper feed tray for the body paper,
the paper will be delivered from a tray containing paper in K orientation.
Therefore, when the cover paper has been set to L orientation, the orienta-
tion of the output cover paper and body paper will be different.
❒ Slip sheets cannot be printed when paper for the slip sheet is fed from the op-
tional interposer.
• For information about setting paper when using the optional interposer,
see “Loading Paper in the Interposer”, General Settings Guide.
❒ The same paper feed tray cannot be set for the main paper and slip sheets.
MartiniC25-EN-Pref-F_FM_ZF.book Page 100 Tuesday, July 27, 2004 11:51 AM
To Next Page
Loading...
