Printer Features
116
5
❖
❖❖
❖ Memory Usage
You can select the amount of mem-
ory used in Font Priority or Frame
Priority, according to paper size or
resolution.
• Font Priority
This setting uses memory for
registering fonts.
• Frame Priority
This setting uses frame memory
for high speed printing.
Note
❒ Default: Frame Priority
❖
❖❖
❖ Duplex
You can select to have print on
both sides of each page.
• Off
• Long Edge Bind
• Short Edge Bind
Note
❒ Default: Off
❖
❖❖
❖ Copies
You can specify the number of
print sets. This setting is disabled if
the number of pages to print has
been specified with the printer
driver or another command.
• 1 to 999 by 1
Note
❒ Default: 1
❖
❖❖
❖ Blank Page Print
You can select whether or not to
print blank pages.
• On
• Off
Pages that match one of the follow-
ing conditions are identified as
blank.
• There are no images.
• There are images but they are
outside of the printable area.
• There are only blank characters.
Note
❒ Default: On
❒ The printer does not identify
pages with white-colored imag-
es as blank.
❖
❖❖
❖ Edge Smoothing
You can set this to enable Edge
Smoothing.
• On
• Off
Note
❒ Default: On
❒ If Toner Saving is set to On,
Edge Smoothing is ignored
even if it is set to On.
❖
❖❖
❖ Toner Saving
You can this to enable Toner Sav-
ing.
• On
• Off
Note
❒ Default: Off
MartiniC25-EN-Pref-F_FM_ZF.book Page 116 Tuesday, July 27, 2004 11:51 AM
To Next Page
Loading...
