User Tools (System Settings)
56
4
❖
❖❖
❖ Output: Printer
You can specify a tray to which prints are delivered.
Note
❒ Default: Copy Tray, Finisher Upper Tray
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❒ The default settings may vary depending on the finisher installed.
❖
❖❖
❖ ADF Original Table Elevation
You can set the timing for elevating the auto document feeder (ADF) original
table.
Note
❒ Default: When Original is Set
❖
❖❖
❖ Job List Display Time
You can set the length of time that the job list display is shown before the dis-
play reverts back to the default screen.
Note
❒ Default: 15 seconds
MartiniC2_ENzen_F_pre_FM.book Page 56 Tuesday, July 27, 2004 1:24 PM
To Next Page
Loading...
