Using the SmartDeviceMonitor for Client Port
19
1
Windows XP, Windows Server 2003:
A
AA
A
Open the [Printers and Faxes] window from the [Start] menu.
The [Printers and Faxes] window appears.
B
BB
B
Click the icon of the machine you want to use. On the [File] menu, click [Prop-
erties]. The printer properties appear.
C
CC
C
Click the [Details] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
• For TCP/IP, timeout setting can be configured.
Note
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow
the procedure below.
A
Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the Smart-
DeviceMonitor for Client icon on the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Par-
allel Printing for each port] check box.
D
Click [OK] to close the [Extended Features Settings] dialog box
• User, proxy, and timeout settings can be configured for IPP.
Reference
For information about these settings, see SmartDeviceMonitor for Client
Help.
To Next Page
Loading...
