Specifying the Extended Security Functions
81
6
❖
❖❖
❖ Permit Settings by SNMP V1 and V2
This can be specified by the network administrator. When the machine is ac-
cessed using the SNMPv1, v2 protocol, authentication cannot be performed,
allowing machine administrator settings such as the paper setting to be
changed. If you select [
Off
], the setting can be viewed but not specified with
SNMPv1, v2.
• On
• Off
Note
❒ Default: On
❖
❖❖
❖ Permit Simple Encryption
This can be specified by the machine administrator.
Under Windows95/98/Me, advanced encryption is not possible with the
printer driver, so simple encryption is used. If you select [Off], printing with
simple encryption is not allowed and you cannot connect using the printer
driver under Windows95/98/Me. Specify this setting when using a driver
that does not support advanced encryption.
Limitation
❒ If you set this to [Off], you cannot edit the address book in [User Management
Tool
] or [
Address Management Tool
] in SmartDeviceMonitor for Admin. In
addition, you cannot access the machine using DeskTopBinder or Scan-
Router delivery software. In this case, you can use SmartDeviceMonitor
for Admin, DeskTopBinder, or the ScanRouter delivery software by ena-
bling SSL/TLS for encrypted communication. For details about specifying
SSL/TLS, see p.45 “Setting the SSL / TLS Encryption Mode”.
• On
• Off
Note
❒ Default: Off
MarC25_EN_SecRef_F_FM.book Page 81 Monday, August 2, 2004 6:14 PM
To Next Page
Loading...
