SM 4-29 G147
Trouble
-shooting
use.
Net File function error
925 B
The NetFile file management on
the HDD cannot be used, or a
NetFile management file is
corrupted and operation cannot
continue. The HDDs are
defective and they cannot be
debugged or partitioned, so the
Scan Router functions (delivery
of received faxes, document
capture, etc.), Web services, and
other network functions cannot
be used.
HDD status codes are displayed
below the SC code:
Refer to the four procedures below
(Recovery from SC 925).
Here is a list of HDD status codes:
Display Meaning
(-1) HDD not connected
(-2) HDD not ready
(-3) No label
(-4) Partition type incorrect
(-5) Error returned during label read or check
(-6) Error returned during label read or check
(-7) “filesystem” repair failed
(-8) “filesystem” mount failed
(-9) Drive does not answer command
To Next Page
Loading...
