G147 4-28 SM
B735 running from an SD card.
876 D Log data abnormal
An error was detected in the handling
of the log data at power on or during
machine operation. This can be
caused by switching the machine off
while it is operating.
Software error. Update the
firmware
NVRAM defective
HDD defective
Electrical total counter error
900 D
The total counter contains
something that is not a number.
NVRAM incorrect type
NVRAM defective
NVRAM data scrambled
Unexpected error from external
source
SC901 Mechanical total count error
901 D
The IO board cannot receive the mechanical
total count data.
Mechanical total
counter defective
Printer error
920 B
An internal application error was
detected and operation cannot
continue.
Software defective; turn the
machine off/on, or change the
controller firmware
Insufficient memory
Printer font error
921 B
When the software application
started, the printer did not detect
a font on the SD card that it can
The fonts on the SD card are not
fonts that can be used with the
printer
To Next Page
Loading...
