Ricoh G147 - Page 181

SM 4-31 G147
Trouble
-shooting
Printer setting error
954 D
The IPU does not respond with the settings
that are required to start image processing by
the printer.
 Software defective
Memory setting error
955 D
The IPU does not respond with the settings
that are required to start image processing
using the memory.
 Software defective
980 D NVRAM Error
A critical SP code setting is not
within range. If the machine is
allowed to operate in this condition,
this could lead to toner overflow and
damage the machine.
 See description below this table.
SP Code Acceptable
Range
SP Code
SP2005 004 Charge Roller
Adjustment 2
-1000 to -2000 V SP2005 004 Charge
Roller Adjustment 2
SP2802 001 TD Sensor Manual
Setting VTS
1.00 to 5.00 V SP2802 001 TD
Sensor Manual
Setting VTS
SP2802 002 TD Sensor Manual
Setting VTMAX
1.00 to 5.00 V SP2802 002 TD
Sensor Manual
Setting VTMAX
SP2802 003 TD Sensor Manual
Setting VTMIN
1.00 to 5.00 V SP2802 003 TD
Sensor Manual
Setting VTMIN