G147 5-30 SM
Disables and enables the toner refill display. The display appears when the
PCDU requires more toner. (Default: *Enable)
*Enable, Disable
Display IP add Display IP Address
5055
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
For example, if this SP is switched on, the IP address will be displayed below
"Ready" while the printer is in standby mode:
Ready
169.254.187.055
Coverage Counter
5056
[0~1/0/1] 0:Not Displayed 1:Displayed
This SP switches the counter list for the system administrator on/off.
Double Count A3/DLT Double Count
5104
Specifies whether the counter is doubled for A3/DLT. “Yes” counts except from
the bypass tray. When “Yes” is selected, A3 and DLT paper are counted twice,
that is A4 x2 and LT x2 respectively.
PaperTypeSelect Paper Size Type Selection
5131
0: Japan, 1: North America, 2: Europe
Selects the paper size (type) for paper. (Default depends on DIP SW 101
setting.)
After changing the setting, turn the machine off and on. If the paper size of the
archive files stored on the HDD is different, abnormal copies could result.
5150 Bypass Length Se Bypass Length Setting
Sets up the by-pass tray for long paper.
To Next Page
Loading...
