G147 5-64 SM
Allows you to move applications from one SD card another. For more, see
"Merging Applications on One SD Card"
001 Move Exec Executes the move from one SD card to another.
002 Undo Exec This is an undo function. It cancels the previous execution.
Security Clear DFU
5876
This SP code clears all security data, only security data in the NCS area, or only
security data in the UCS area.
001 All Clear
011 Clear NCS Sec.
015 Clr UCS Sercurity
Option Setup Data Overwrite Security (DOS) Setup
5878
Press [#Enter] to initialize the Data Overwrite Security option. For more, see "MFP
Controller Options" in Section "1. Installation".
ROM Update
5886
The setting of this SP allows or prohibits updating the ROM.
*0:YES, 1:NO
Plug/Play Plug & Play Maker/Model Name
5907
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names
should be registered again.
MechCountDetect Mechanical Counter Detection
5915
0: Not detected, 1: Detected, 2: Unknown
To Next Page
Loading...
